Publish Time: 2022-04-06 Origin: Site
The paper bag-making machine is an industrial machinery and equipment for the production of paper bags. Its production process mainly includes the steps of material discharge, roll paper folding, forming, bag cutting, gluing, bottom folding, bottom gluing, the output of finished bags, etc. The paper bag-making machine is used to produce environmental protection paper bags, which are used in all walks of life. The fully automatic paper bag-making machine can automatically produce paper bags by placing the material directly after setting and sending it for inspection after production. The main thing to note about operating a paper bag-making machine is the safety of production, good pre-start inspection, and cleaning after stopping the machine to deal with faults promptly. Here's a look at how to operate the paper bag-making machine.
Here is the content list:
Startup the machine
Operation
Shutdown
Quality inspection
(1) According to the requirements of the production notice on the film roll, adjust the size of the bag, install the heat sealing knife, and the initial adjustment of the position of the slitting knife and heat sealing knife.
(2) Turn on the power, set the heat sealing knife temperature as required by the process document, and input the relevant data for paper bag making and the required number of each tie.
(1) Start the main motor and run at low speed, then adjust the side position control to divide the film pair in the middle position.
(2) Adjust the left and right pinch rollers to align the left and right film, and adjust the front and rear pinch rollers to align the pattern.
(3) Adjust the heat sealing knife so that it heat seals within the required range of the paper bag.
(4) Adjust the slitting blade to the required position and adjust the punching position to the scissor opening.
(5) Adjust the machine speed and take a flat-out sample bag once for an initial inspection, if it does not meet the required requirements, take another step to test the heat seal value of the flat-out sample bag.
(6) The produced paper bags will be sorted and checked, and the paper bags with quality defects such as folds, flower widths, knife lines, and poor heat sealing will be removed and tied and tied up.
(7) Machine quality inspector for inspection, and so on after passing the test, paste the certificate of conformity, sent to the quality inspection room for sampling.
Disconnect the total power switch, then disconnect the power switch of each part, clean the machine hygiene and site hygiene, make a good record of the shift before leaving work.
(1) The paper carries bag-making machine personnel will bundle the qualified products and hand them over to the machine-quality inspector for inspection, and the machine-quality inspector will inspect the quantity and quality of each bundle. Inspection, after the quantity and quality are qualified, according to the requirements of the box, into the packing list; Choose out of the unqualified products placed in the carton with unqualified. The unqualified products are placed in the carton with unqualified markings.
(2) The paper carry bag making machine personnel will send the products of the shift to the appearance quality inspection room, and the chief quality inspector will carry out a random inspection on the products sent for inspection according to the prescribed ratio, and pack them into storage after passing the inspection.
In general, grocery paper bag-making machines are the company's main product. For consumers, paper shopping bag-making machines are effective. The company will be more committed to producing more and better paper carrier bag-making machines for consumers. If you are interested in the business of paper bag making small machines, you can go to our website for consultation, our website is www.bosenmac.com.