Cleaning and Maintenance of Flexo Printing Machine

In the process of using the Flexo Printing Machine, it should be properly cleaned and maintained to protect the long-term operation of the Flexo Printing Machine. Next, let's take a look at the cleaning and maintenance of Flexo Printing Machines. Here are some answers.

Here is the content list:

• Cleaning the content

• Maintenance content

Cleaning the content

The Flexo Printing Machine should be cleaned in the following cases. First, after using the Flexo Printing Machine, the printing plate should be removed, and the solvent and splashed ink on the printing plate roller should be brushed off. Second, when changing product specifications and re-adjusting slitting, indentation, and grooving, it is necessary to clean up the paper scraps inside and outside the machine. Also wipe excess oil, ink, and lubricating oil from the machine and clean the rails. Fourth, clean the anilox roller, diaphragm pump, and its pipeline after shutdown. The ink distribution can be started, and the motor is pumped by the diaphragm pump to clean the anilox roller, the diaphragm pump, and its pipelines. Fifth, before leaving get off work every day, all equipment should be cleaned, and the rubber rollers, printing plate cylinders, and impression cylinders of the ink and water channels should be cleaned.

Maintenance content

The maintenance of the Flexo Printing Machine is a more important job. Good maintenance work will not only increase the service life of the machine but also complete the work with high quality. The maintenance method is as follows. First, before starting the Flexo Printing Machine every day, check whether the CP window, LCD screen, and console of the printing equipment are abnormal. It is also necessary to observe whether the fountain solution and powder in the fountain solution device and the powder spray device are used up, and avoid dry pumping and dry spraying of the equipment. Check whether the stopper on the ink fountain is pressed tightly to avoid ink leakage during the printing process, resulting in the accumulation of ink on the sidewall of the printing equipment. Second, during the production process, the cuffs and hem of the operator's clothes should be fastened. When opening the baffle and hood, it should be gently pulled and handled. It is not allowed to pile up sundries on the equipment pedals, and tools are not allowed to be thrown. Third, carry out daily maintenance in strict accordance with the operation manual every day, be careful, and cannot ignore perfunctory maintenance. Fourth, before starting the Flexo Printing Machine, check whether all parts of the machine are in good condition and observe whether it is running normally. After there is no abnormal sound, accelerate to the normal speed suitable for the operator. If there is an abnormal response, stop and check immediately.

Our official website is www.bosenmac.com. If you are in a related occupation or are interested in our Flexo Printing Machine products, please remember to contact us. Our film printing machines, flexo label printing machines, central drum flexo printing machines, and other products have passed CE certification and introduced ISO9001 quality management methods. Every process from mechanical design, production, assembly, and testing is strictly controlled. Please choose with confidence.